-
A shackle assembly is shown to include a shackle bracket, wear pads, a shackle stop, shackle plates and elastomer bushings.The rear leaf spring shackle is generally divided into two types: front
Add to Inquiry
-
The mechanisms including a drive gear driven by the power source, a driven gear fixed with the brush, and an idler gear for transmitting rotational motion from the drive gear to the driven gear.
Add to Inquiry
-
Piston is a reciprocating part in the cylinder body of automobile engine. The basic structure of the piston can be divided into top, head and skirt. The top of the piston is the main part of the
Add to Inquiry
-
Fog lamp is to show automobile fog lamp commonly. Fog lamps are installed in the front and rear of the car, which are used to illuminate the road and warn safety when driving in rainy and foggy
Add to Inquiry
-
Brake Slave Cyl is an indispensable part of the brake system chassis brake parts, its main role is the top brake pad, brake pad friction brake drum.
Add to Inquiry
-
Gear is a wheel-like mechanical part that transmits torque by meshing with teeth. The gear drives the camshaft through the transmission with other toothed mechanical parts (such as another gear,
Add to Inquiry
-
The wheel nut is a special nut used to hold the outer hub of a car in place so that the wheels do not come off the axle when the bolts gradually loosen during cornering, braking or acceleration.
Add to Inquiry
-
Sealed thermostat, according to the temperature of cooling water automatically adjust the amount of water into the radiator, change the water cycle range, in order to adjust the cooling capacity of
Add to Inquiry
-
The wire pull wire is connected to the rear brake shoe to realize the braking of the vehicle. Therefore, the handbrake is a consumable, long-term use of its steel wire will produce plastic
Add to Inquiry
-
Tank support in engine room. Even if due to vibration, wind and other reasons sudden external force, water tank support device can also make the water tank in a safe working state.
Add to Inquiry
-
The clutch gear of the starter is sent to the engine flywheel gear ring by energizing the coil to make the iron core move. When the clutch gear is coupled with the flywheel gear ring, the starter
Add to Inquiry
-
Isuzu logo For commercial and industrial products, as brand publicity.
Add to Inquiry
